이미지와 같이 납땜 방식의 고급형 바나나 플러그 입니다.



삽입되는 플러그부의 구경이 4mm로 두꺼운 편으로 구경이 단자에는 사용이 불가능할 수 있습니다.

사용하시는 스피커나 앰프의 바인딩 포스트 단자 구경 확인 후 주문해주세요![주문전 필히 확인 해주세요!]



사용이후(남땜이나 연결)에는 교환이나 반품환불이 불가능합니다. 

The regular available banana connectors are not at all on the same quality level as the cables they are supposed to co-operate with. Therefore the same philosophy we used with our other connector types was applied again.



We came up with our own 3 parts (pin, shell and cable clamp) design serving two basic cable exit ranges.



Especially the contact springs on the top mounting took a great deal of time before the design was optimised.



All conductive parts are (as regular) plated with a very pure silver and gold. Again, we don"t like any oxidation. Even not after 5 years after purchase.



For optimal contact care we recommend our The SOLUTION contact fluid. The rear-end of the banana connector functions as a cable clamp to prevent mechanical stress on the solder connection. 



B - 352: Limited Stock.

Please refer to our new Universal Speaker Connectors.

Banana connector with an exit opening of 8.5 mm. and cable clamping down to 7.5 mm. diameter. I.e. suited for cable diameters in the 7.5 - 8.5 mm. range.

The B - 352 is adapted to the external insulation dimensions of our D - 352 HYBRID, The MAGNUM HYBRID, The BREEZE HYBRID, The INSPIRATION HYBRID, The REVOLUTION HYBRID and SCS - 4. Colour: Mat black with colour rings for polarity identification.



Available: Per pair in luxe consumer carton (other quantities are standard packed) or mounted to your specifications on the cable types mentioned here.



-전체길이 : 5.5cm

-삽입부길이 : 2.3cm

-케이블 최대 삽입내경 :7mm